General Instrument Settings and Instrument Setup
R&S
®
SGS100A
136User Manual 1173.9105.02 ─ 12
The settings of this dialog are not accessible over remote control (e.g. SCPI com-
mands).
Change User Password
The user name and password are required for remote access to the instrument via
VNC, FTP or SAMBA.
Note: It is highly recommended to change the default user password before connect-
ing the instrument to the network.
User Name ← Change User Password
Indicates the user name used for access to the Linux operating system and valid for
VNC, FTP and SAMBA access.
Old Password ← Change User Password
Enter the currently used user password. The default password is "instrument".
Security Setting
To Next Page
Loading...
