Understanding the R&S SGMA-GUI Software
R&S
®
SGS100A
57User Manual 1173.9105.02 ─ 12
Scan LAN instruments with host name prefix
Sets the prefix the searched host names begin with. Use this function to limit the
amount of the searched instruments and to speed up the scan process.
For example, set this field to "RsSGS, RsSGU, RsSGT", if you want to search for all
available instruments.
Tip: If you start a scan for an instrument with a set IP address and it does not appear
in the list of available instruments it may be due to the prefixes written in this field. You
can perform another scan while leaving this field empty.
Remote command:
:INSTruments:SCAN:HNPRefix on page 78
6.1.2.2 Add/Edit Instruments
The dialog provides access to the main instrument's settings, such as "Symbolic
Name", "Instrument Type" and connection settings.
Refer to
Chapter 6.4.2, "Handling Instruments in the R&S SGMA-GUI", on page 68
for information on how to configure and manage instruments in R&S SGMA-GUI.
Instrument Nr.
Automatically assigned number that indicates the instrument's index in the list of "Avail-
able Instruments".
Symbolic Name
Selects the alias name of the instrument.
Operating Menu and Toolbar
To Next Page
Loading...
