Rohde & Schwarz SGS100A - 11.8 Extension Subsystem; Extension:instruments:name; Extension:instruments:remote:channel; Extension:instruments:scan[:State]

Remote Control Commands
R&S
®
SGS100A
210User Manual 1173.9105.02 ─ 12
:EXTension:REMote:STATe?
Queries the state of the remote control connection to the extension.
Return values:
<State> 0 | 1 | OFF | ON
1|ON
Connected
0|OFF
Not connected
Example: See Chapter 11.1.5, "Enabling and Configuring an Extension
Mode", on page 197.
Usage: Query only
Manual operation: See "Available Instruments" on page 126
:EXTension:INSTruments:NAME?
Queries the list of the symbolic names of the available extension devices.
Usage:
Query only
Manual operation: See "Available Instruments" on page 126
:EXTension:INSTruments:SCAN[:STATe] <State>
Starts a scan for the available extension instruments.
Parameters:
<State> 0 | 1 | OFF | ON
1
Starts scan.
0
Aborts scan.
*RST: OFF
Example: See Chapter 11.1.5, "Enabling and Configuring an Extension
Mode", on page 197.
Manual operation: See "Available Instruments" on page 126
:EXTension:INSTruments:REMote:CHANnel?
Queries the remote channels of the available extension instruments. Possible interfa-
ces are: LAN, USB, SOCKet, PCIe.
EXTension Subsystem