Rohde & Schwarz SGS100A - Mmemory:delete; Memory:hfree; Mmemory:load:state

Remote Control Commands
R&S
®
SGS100A
219User Manual 1173.9105.02 ─ 12
:MMEMory:DELete <Filename>
Removes a file from the specified directory.
Setting parameters:
<Filename> string
String parameter to specify the name and directory of the file to
be removed.
Example: See "Working with Files and Directories" on page 214.
Usage: Event
SCPI confirmed
:MEMory:HFRee?
Returns the used and available memory in Kb.
Return values:
<TotalPhysMemKb> integer
Total physical memory.
<ApplicMemKb> integer
Application memory.
<HeapUsedKb> integer
Used heap memory.
<HeapAvailableKb> integer
Available heap memory.
Usage: Query only
:MMEMory:LOAD:STATe <SavRclStateNumb>, <file_name>
Loads the specified file stored under the specified name in an internal memory.
After the file has been loaded, the instrument setting must be activated using an *RCL
command.
Setting parameters:
<SavRclStateNumb> Determines to the specific <number> to be used with the *RCL
command, e.g. *RCL 4.
<file_name> String parameter to specify the file name with extension
*.savrcltxt.
Example: See "Storing and Loading Current Settings" on page 214.
Usage: Setting only
MMEMory Subsystem