Rohde & Schwarz SGS100A - General Commands; Trg; Tst; Wai

Remote Control Commands
R&S
®
SGS100A
203User Manual 1173.9105.02 ─ 12
Reads the contents of the status byte in decimal form.
Usage: Query only
*TRG
Trigger
Triggers all actions waiting for a trigger event. In particular, *TRG generates a manual
trigger signal. This common command complements the commands of the TRIGger
subsystem.
Usage: Event
*TST?
Self-test query
Initiates self-tests of the instrument and returns an error code.
Return values:
<ErrorCode> integer > 0 (in decimal format)
An error occurred.
(For details, see the Service Manual supplied with the instru-
ment).
0
No errors occurred.
Usage: Query only
*WAI
Wait to continue
Prevents servicing of the subsequent commands until all preceding commands have
been executed and all signals have settled (see also command synchronization and
*OPC).
Usage:
Event
11.3 General Commands
:LOCK?.........................................................................................................................203
:UNLock........................................................................................................................204
:LOCK? <LockRequestId>
Sends a lock request ID which uniquely identifies the controller to the instrument.
Parameters:
<LockRequestId> Number
General Commands