General Instrument Settings and Instrument Setup
R&S
®
SGS100A
135User Manual 1173.9105.02 ─ 12
2. To deactivate the protection, the correct password has to be entered. After the
instrument has been switched on, the protection levels 1 to 4 are automatically
activated.
Enter "Protection Level 1 > Password > 123456".
Protection Level 1 is activated.
Protection Level / Password
"Protection Level 1" can be activated to expand the functionality of the internal adjust-
ment. The password is 123456.
The other protection levels 2 to 4 provide access to protected service functions. Only
the authorized personnel of R&S Service Departments can access these functions.
8.7 Security Setting
The R&S SGS employs a security concept based on user and security password. The
security password is required for changing several critical settings, like performing firm-
ware updates. Access to the passwords and mass storage security settings is provided
in the "Security" dialog.
► To access the "Security" dialog, select "SGMA-GUI > Instrument Name > Setup >
Security"
The menu is divided into the password sections and the security settings section. In
the password section, the passwords for securing a controlled access to the instrument
are defined and changed.
A change of passwords for the operating system and security password requires the
entry of the old and new password and the conformation of the new password. All set-
tings are only accepted after the "Change Password" button is pressed.
Security Setting
To Next Page
Loading...
