Rohde & Schwarz SGS100A - System:hardware:assembly<Dir>:Snumber; System:software:option<Dir>:Designation; System:software:option<Dir>:Expiration

Remote Control Commands
R&S
®
SGS100A
276User Manual 1173.9105.02 ─ 12
:SYSTem:HARDware:ASSembly<dir>:SNUMber?
Queries the list of hardware module serial numbers.
Suffix:
<dir>
.
1..2
Defines the section: 1 = common assembly, 2 = RF assembly.
Return values:
<SNumber> string
Example: See Chapter 11.1.1, "Performing General Task for Instrument
Setup", on page 191.
Usage: Query only
Manual operation: See "Assembly" on page 131
:SYSTem:SOFTware:OPTion<dir>:DESignation?
Queries the list of option descriptions.
Suffix:
<dir>
.
1..2
Defines the section: 1 = hardware, 2 = software.
Return values:
<Designation> string
Example: See Chapter 11.1.1, "Performing General Task for Instrument
Setup", on page 191.
Usage: Query only
Manual operation: See "Hardware / Software/WinIQSIM" on page 133
:SYSTem:SOFTware:OPTion<dir>:EXPiration?
Queries the list of option expiration informations.
Suffix:
<dir>
.
1..2
Defines the section: 1 = hardware, 2 = software.
Return values:
<Expiration> string
Example: See Chapter 11.1.1, "Performing General Task for Instrument
Setup", on page 191.
Usage: Query only
Manual operation: See "Hardware / Software/WinIQSIM" on page 133
SYSTem Subsystem