Rohde & Schwarz SGS100A - Advanced Config; IP Configuration

Network and Remote Control Operation
R&S
®
SGS100A
182User Manual 1173.9105.02 ─ 12
It comprises the following navigation entries.
● IP Configuration.................................................................................................... 182
● Advanced Config...................................................................................................182
● Ping Client.............................................................................................................183
● SCPI Remote Trace.............................................................................................. 184
10.5.3.1 IP Configuration
The "IP configuration" web page displays all mandatory LAN parameters and allows
their modification.
The "IP Address Mode" selects a configuration mode for the IP address of the instru-
ment. With static configuration, the entered IP address, subnet mask, and default gate-
way are used. With dynamic configuration, DHCP or dynamic link local addressing
(automatic IP) are used to obtain the instrument IP address.
Password protection
Changing the LAN configuration is password-protected and requires the security pass-
word. The default password is "instrument".
10.5.3.2 Advanced Config
The "Advanced Config" web page provides LAN settings that are not declared manda-
tory by the LXI standard.
LXI Configuration