Preparing for Use
R&S
®
SGS100A
30User Manual 1173.9105.02 ─ 12
Using a USB Adapter
You can use a USB adapter to customize the connectors of a USB cable to the require-
ments of the instrument.
For example, you can use a Type-A / Micro-A adapter to customize a standard USB
cable with type A and type Micro-B connectors for the connection of an R&S SGS (act-
ing as a host) to an R&S SGU (acting as a USB device).
In some cases, you can also use a Type-A / Micro-B adapter to establish a connection
to the instrument. To check, whether the adapter you have is suitable or not you can
connect a USB stick with an LED through the adapter to the instrument. If the LED of
the USB stick lights up after a connection to the instrument then you can use this
adapter for further applications with the instrument.
Connecting an External PC and Devices
To Next Page
Loading...
