SAM4s ER-900 Series Operator's & Programming Manual v.1.28 S-Mode Programming • 113
Flash ROM Information
The ER-900 register software is loaded in a Flash ROM. This procedure will provide a
receipt with the current version, date and checksum for the Flash ROM.
1. Turn the control lock to the S position.
2. Enter 50 and press the SUBTL key.
3. After a short delay, the register will print a receipt as in the example below:
DATE 07/01/2011 FRI TIME 08:37
EPROM INFO.
VERSION : USA 01.024
CHECKSUM : E039
BOOT/APP : A741/38F8
PLUs USED: 300/2000
EFT Ver. : DTRAN 01.000
MAR. 13 2012
CLERK 1 000001 00001
5 0 SUBTL
To Next Page
Loading...
