Sam4s ER-920 - Program 1300 - Date and Time Programming

200 • P-Mode Programming SAM4s ER-900 Series Operator's & Programming Manual v.1.28
Program 1300 - Date and Time Programming
Use this program to set the clock and calendar on your ER-900 Series register. The date
changes automatically. After initial setting, time changing will probably be required only for
beginning and ending daylight savings time.
Programming the Date and Time
1. Turn the control lock to the PGM position.
2. To begin the program, enter 1 3 0 0, press the SUBTL key.
3. Enter time in military standard time (based on 24 hours), must be four digits (i.e.
1300 hours = 1:00 PM); press the X/TIME key.
4. Enter the date in MM(month) DD(day) and YY(year) format. Press the X/TIME
key:
5. Press the CASH key to finalize the program.
3 0 0 SUBTL1
H M M X/TIMEH
CASH
D M M D Y
X/TIME
Y