Sam4s ER-920 - Program 801 - Drawer Assignment

SAM4s ER-900 Series Operator's & Programming Manual v.1.28 P-Mode Programming • 185
Program 801 - Drawer Assignment
1. Turn the control lock to the PGM position.
2. To begin the program, enter 8 0 1, press the SUBTL key.
3. Enter the number (1-99) of the clerk you wish to program; press the X/TIME
key.
4. Refer to the table below and enter a 2-digit option code. Press the SUBTL key.
Address OPTION VALUE =
N1
Assign to drawer 1:
Assign to drawer 2:
No Drawer:
1
2
0
N2
Train Clerk Yes = 1
No = 0
N2 SBTLN1
5. Repeat from step 3 for each clerk you wish to program. Press the CASH key to
finalize the program.
8 0 1 SUBTL
X/TIME
CASH