Sam4s ER-920 - Function Key Assignment Programming

SAM4s ER-900 Series Operator's & Programming Manual v.1.28 S-Mode Programming • 99
Function Key Assignment Programming
Function keys may be relocated, inactivated or changed with this program. For example, you
may wish to add functions, such as PREVIOUS BALANCE and SERVICE, which may not
be placed on the default keyboard. Or perhaps, you may wish to remove a function, such as
CANCEL, for security reasons.
Please note the following limitations:
 If you assign a duplicate of a function code, the duplicate will function exactly as
the original - you will not get separate totals and counters on reports for the
duplicated key.
 You can reassign keys only in locations that are programmable. See "Keyboards"
on page 17 to determine the key locations that are fixed and cannot be changed.
To Assign a Function Key to a Location
1. Turn the control lock to the S position.
2. Enter 7 0 and press the SUBTL key.
3. Refer to “Function Key Codes” on page 100 to find the code for the key you
wish to assign. Enter the code and press the location you wish to program.
Repeat this step to assign another key.
4. Press the CASH key to finalize key assignment programming.
0
SUBTL7
Key Code
Key
Locati
o
n
CASH