134 • P-Mode Programming SAM4s ER-900 Series Operator's & Programming Manual v.1.28
Program 350 - PLU Link Programming
PLU link programming allows you to link a PLU to another PLU, so that registration of the
first PLU will automatically trigger registration of the linked PLU. For example, you may
wish to link a bottle deposit with the sale of beverages, or you may wish to register a group of
items normally sold together.
1. Turn the control lock to the PGM position.
2. To begin the program, enter 3 5 0, press the SUBTL key.
3. Select the PLU you wish to program in one of the following ways:
Press a PLU key on the keyboard or scan the item.
Enter the number of the PLU (up to 15 digits) and press the PLU key.
4. Enter the number of the PLU you wish the PLU linked to; press the PLU key. Or
press the PLU key on the keyboard you wish the PLU linked to.
If you want to unlink
5. To program additional PLUs, repeat from step 3, or press the CASH key to
finalize the program.
3 5 0 SUBTL
PLU
PLU
CASH
PLU
PLU
Or,
0 PLU
To Next Page
Loading...
