Sam4s ER-920 - Unpacking and Installing Paper

22 • Getting Started SAM4s ER-900 Series Operator's & Programming Manual v.1.28
Unpacking
1. Unpack and unwrap the cash register.
2. Locate in the packing the following items:
 1 roll of paper
 1 rewind spindle (ER-940/ER-945 only)
 2 sets of control keys
3. Remove the cardboard protectors from the cash drawer.
4. Plug the register into a grounded outlet (three-prong), turn the power switch on, insert a
control key and turn the key to the REG control lock position.
Installing the Paper
1. Remove the printer cover.
2. Push the blue cap lever and then lift up to open the paper cover.