Sam4s ER-920 - Gift Card Operations

220 • Integrated Payment Appendix SAM4s ER-900 Series Operator's & Programming Manual v.1.28
Gift Card Operations
Sale of Gift Card
1. Register the gift card amount into a PLU linked to a unique PLU Group with the
gift card activate function. (See “Group Programming” on page 187 to set group
options.)
2. Immediately after the PLU is registered, the message “SLIDE GIFT CARD”
displays.
3. Slide the gift card. The terminal displays “WAITING RESP.” until the card is
activated with the proper amount. The activation draft is not printed until the
sale is completed.
4. If necessary, continue to register additional items of gift cards in the same
transaction. Up to five gift cards may be sold in the same transaction.
5. When activation is complete, the receipt and the draft(s) are printed.
Sample Draft
07/20/11 10:10 1
GIFT ISSUE $50.00
***************6540
APP: 423265
REF: 423265
BAL: 50.00
*
Addition to Gift Card
The procedure is identical to sale of gift card, except enter the amount of the addition into a
distinct PLU programmed linked to a separate PLU Group set with the gift card add function.
(See “Group Programming” on page 187 to set group options.)
Check Gift Card Balance
The gift card balance can be checked when outside of a sale.
Press the appropriate CHARGE key (with gift function). When prompted, slide the gift card.
When verification is complete, the amount of the balance will print on a chit.