116 • P-Mode Programming SAM4s ER-900 Series Operator's & Programming Manual v.1.28
Tax Programming
The ER-900 has the capability to support four separate taxes.
Taxes can be calculated as either a straight percentage rate of between .001% and 99.999%,
or a 60 break point tax table. Each tax may be either an add-on tax (added to the cost of a
taxable item), or a value added tax (VAT) that is included in the price of the item.
Tax rate 4 may be set to function as the Canadian Goods & Services Tax (GST). If Tax 4 is
designated as GST, table programming for the rate is not allowed.
Definitions for tax rates 1, 2, 3 & 4 are made as part of tax programming.
If you are entering a tax rate (add-on or VAT), see "Straight Percentage Tax Rate
Programming" to enter the percentage rate.
If you are entering a tax table, see “Tax Table Programming” to enter the tax break
points.
If you are entering a Canadian Goods and Services Tax (GST), use tax rate 4 for the
GST tax, and use tax rates 1, 2 and/or 3 for any other provincial tax or taxes. See
"Straight Percentage Tax Rate Programming" to enter the GST status and percentage
rate.
Important Note: After you have entered your tax program(s), test for accuracy by
entering several transactions of different dollar amounts. Carefully check to make sure
the tax charged by the cash register matches the tax on the printed tax chart for your
area. As a merchant, you are responsible for accurate tax collection. If the cash register
is not calculating tax accurately, contact your dealer for assistance.
To Next Page
Loading...
