Sam4s ER-920 - Programming Tax & Preset Status for Keyboard Plus

30 • Getting Started SAM4s ER-900 Series Operator's & Programming Manual v.1.28
Programming Tax & Preset Status for Keyboard PLUs
Tax status and preset status for PLUs is set as part of the PLU Status Program, where many
other PLU options are set as well. For many basic users, tax and preset status are the only
necessary settings, so a short cut program sequence is shown here. If you need to review
other PLU status options, go to “Program 100 - PLU Status Programming” on page 123 for
detailed instructions.
1. Turn the control lock to the P position.
2. To begin the program, enter 1 0 0, press the SUBTL key.
3. Press a PLU key on the keyboard.
4. For an open-entry PLU taxable by tax rate 1, enter the nine digits as shown and press the
X/TIME key:
For a preset PLU taxable by tax rate 1, enter:
For an open-entry, non-taxable PLU, enter:
To return the PLU to the default, non-taxable, preset, status, enter:
5. To program additional PLUs, repeat from step 3, or press the CASH key to finalize the
program.
0 0 5 0 0 X/TIME 0 0 0 0
0 0 4 0 0 X/TIME 0 0 0 0
0 0 1 0 0 X/TIME 0 0 0 0
CASH
0 X/TIME