Sam4s ER-920 - Memory Allocation Program Scan

98 • S-Mode Programming SAM4s ER-900 Series Operator's & Programming Manual v.1.28
Memory Allocation Program Scan
You can read the current memory allocation with the following sequence:
1. Turn the control lock to the S position.
2. Enter 6 0, press the SUBTL key and then press the CASH key.
DATE 04/02/2011 FRI TIME 08:37
================================
TTL AVAIL : 327680
TTL USED : 269050
--------------------------------
1.ALLOCATED PLU IS :2000
2.ALLOCATED CLERK IS :10
3.ALLOCATED GROUP IS :20
4.ALLOCATED CHECK IS :10
5.ALLOCATED CHK LINE IS :50
6.ALLOCATED HARD(1),SOFT(0):0
7.ALLOCATED LEVEL IS : 1
8.ALLOCATED M&M IS :20
9.ALLOCATED EJ LINE IS : 1000
================================
CLERK 1 000001 00001
0
SUBTL6
CASH