Sam4s ER-920 - Instructions for Currency Conversion Rate - Program 90

156 • P-Mode Programming SAM4s ER-900 Series Operator's & Programming Manual v.1.28
Instructions for Currency Conversion Rate - Program 90
1. Turn the control lock to the PGM position.
2. To begin the program, enter 9 0, press the SUBTL key.
3. Enter the exchange rate of up to 7 digits (do not enter the decimal point), and
then enter a number from 0 to 7 to indicate the decimal position. See "Currency
Exchange Rate Programming Examples" below.
4. Press the function key on the keyboard you wish to program.
5. To program additional function keys, repeat from step 2, or press the CASH key
to finalize the program.
Currency Exchange Rate Programming Examples
Note: Foreign currency exchange rates may be stated as “foreign currency in dollars”,
or “dollars in foreign currency”. Use the rate stated in “dollars in foreign currency”
when you are programming this section.
The US dollar (home currency) is worth 1.3720 Canadian dollars (foreign currency).
The US dollar (home currency) is worth 110.24 Japanese Yen (foreign currency).
0 SUBTL9
Exchange Rate
Decimal
Position
CASH
FUNCTION
KE
Y
Exchange Rate
4 3 7 2
Decimal
Position
0 1
Exchange Rate
2 1 0 2
Decimal
Position
4 1