120 • P-Mode Programming SAM4s ER-900 Series Operator's & Programming Manual v.1.28
Programming a Tax Table (Versions v1.019 or later)
1. Turn the control lock to the PGM position.
2. Enter 101 for TAX 1
Enter 102 for TAX 2
Enter 103 for TAX 3
Enter 104 for TAX 4
3. Press the TAX 1 key.
4. Enter the maximum amount that is not taxed and press the TAX 1 key.
5. Enter the first tax amount charged and press the TAX 1 key.
6. For each non-repeat break point, up to the last non-repeat break point, enter the
high side from the sale dollar range and press the TAX 1 key.
7. For the last non-repeat break point, enter the high side from the sale dollar range
and press the X/TIME key.
8. For each repeat break point, enter the high side from the sale dollar range and
press the TAX 1 key.
9. Press the CASH key to end the tax table program.
To Next Page
Loading...
