Sam4s ER-920 - Page 28

28 • Getting Started SAM4s ER-900 Series Operator's & Programming Manual v.1.28
cleared, the default program is installed and the RAM CLEAR receipt is printed. The
display now reads: “PRINTER 2STATION; Y=CASH N=CLEAR”.
7. If you have an ER-925 (one printer station), press CLEAR.
If you have an ER-945 (two printer stations), press CASH.
8. The display now reads: “AUTO CUT ?; Y=CASH N=CLEAR”.
Press CLEAR.
9. The display now reads: “SERVICE MODE; CLOSED”. The RAM Clear procedure
is complete.
RAM Clear Receipt Example
DATE 07/01/2011 FRI TIME 08:37
================================
RAM ALL CLEAR OK !
================================
RAM (4M) OK
EPROM INFO.
VERSION : USA 01.024
CHECKSUM : E039
BOOT/APP : A741/38F8
PLUs USED: 300/2000
EFT Ver. : DTRAN 01.000
MAR. 13 2012
CLERK 0 000001 00000
(Note: EFT Version # prints
at version 1.019 or later)