Sam4POS Operators Manual v2.33 Report Mode • 181
3. We can edit the Job Code, Start Time End Time or Type; Touch the time entry field for the employee time you
wish to edit. To Edit Clock In entry, touch the START TIME or the END TIME (MM-DD-YYYY HH:MM)
entry field. The time edit dialog displays:
4. You can edit the Month – Day – or Year as well as the Hours – Minutes and AM/PM entry. Touch OK to save.
(Note that the original start time entry is shown in the title bar.) For the End Time you can also edit time entry type
for the time entry:
a. DELETE – to delete the current end time entry.
b. OUT – if the new entry is the time out at end of their shift.
c. BREAK TIME - if the time entry is for clocking out for their break.
d. CANCEL – to cancel any changes without saving.
5. Press SAVE to apply the new entry; pressing CANCEL will exit without applying any changes.
To Next Page
Loading...
