SatLab SLT2 - Page 106

Total Station Manual
-
105
-
Figure 11.1 Traverse Diagram
Known
P0 known point
a Direction from P1 to P2
d Distance between P1 and P2
d1 Positive offset to the right
d2 Negative offset to the left
Unknown
P1 COGO point without offset
P2 COGO point with negative offset
P3 COGO point with positive offset
Steps
Key
Display
○
1 Select “Program” from the
[Main Menu] window, then
press [PAGE] switch to second
program list and press [F1] or
number key [7] to enter the
COGO application.
[PAGE]
+
[F2]
or
[7]