SatLab SLT2 - Page 107

Total Station Manual
-
106
-
○
2 After finishing the
pre-settings (know more
details at the beginning of
chapter 5), press [F4] to start
COGO app.
[F4]
or
[4]
○
3 In [COGO Menu] screen,
press the [F1] or number key
[1] enter the [Traverse &
Inverse] screen, press [F2] or
[2] enter the traverse sub
application.
[F1]
or
[1]
[F2]
or
[2]
○
4
There are four ways to
get the known point for
traverse calculation.
A: Input the name of known
point in “Pt.” field in
[Traverse] screen and press
[F1](Meas.) entry the [COGO
Meas]
Input prism height in the
“T.H.” field in [COGO-Meas],
then aim the prism and press
[F1] (ALL) or [F2] (DIST) + [F3]
(REC) to measuring and saving
the point for traverse
calculation.
Input point
name
+
[F1](Meas.)
[F1](ALL)
or
[F2](DIST)
+
[F3](REC)
A: Get the known point by
COGO-Meas.
COGO-Meas.