SatLab SLT2 - Page 125

Total Station Manual
-
124
-
○
3 Then baseline is defined,
press [ ▼ ] key to move the
focus down and input the
longitudinal and offset
distance.
[▼]
+
Input
distance
○
4
When all of the data are
set correctly, press
[F2](Result) to calculate the
intersection point and show
the results.
Input the name of result point
in the [SetPT Result] and
press [F4](REC) to save the
point.
[F2]
※ In all of the above operation, press [ESC] to return to the previous menu.
※ The result point is plane data.