SatLab SLT2 - Page 31

Total Station Manual
-
30
-

Standard meteorological conditions (atmospheric correction value =0 ):
press: 1013hPa
temperature: 20℃

If the atmospheric correction is not required, please set PPM to zero.
Steps
Key
Display
○
1 After entering to the interface
of EDM Setting. Press [F1] (Atoms)
to enter the interface of
Atmospheric Data.
[F1]
○
2 Interface displays the current
settings.
↓
○
3
Input the value of temperature.
example: Enter 26℃ and press the
key of [ENT].
The cursor moves to the setting
item of Press.
[ENT]
○
4 Input the value of atmospheric
pressure.
example: Enter 1020 hPa and press
the key of[ENT].Program calculates
the value of PPM and the cursor
moves to the setting item of PPM.
※
1
※
2
※
3
※
4
[ENT]