SATO s84ex - ESC+BF UPC Add-On Code(BOOKLAND)

114
68.1 Barcode
68.1 ESC+BF UPC Add-on
Code(BOOKLAND)
ESC+BF
Hexadecimal
code
ESC
BF
Parameter
<1B>
16
<42>
1
6<46>
16
aabbbn~n
Initial value
Nil
Valid range and
term of
command
When the power switch is OFF
The set parameter is not maintained.
Valid range within item
The parameter preset will be invalid.
Valid range between item
The parameter preset will be invalid.
[Function]
Specify UPC Add-on code (BOOKLAND)
[Format]
<BF>aabbbn~ｎ
●Parameter
a[Narrow bar width] = Valid range : 01 to 36 dots
b[Height of barcode] = Valid range : 001 to 999 dots
n[Print data] = Numeric (0 to 9) : 2, 5 digits
[Coding Example] Narrow bar width : 03 Height of barcode : 120
<A>
<H>325<V>725<BD>H0315009827721123
<H>640<V>760<BF>0312021826
<H>655<V>730<OB>21826
<Q>1
<Z>
[Notes]
1. Barcode that other than 2-digit or 5 digit are specified will not be printed.
2. Only numeric can be specified as print data. Refer to the Bookland - Code Table.
3. There is no auto HRI specification.
4. When UPC Add-on code <BF> only is printed, it will not be readable.
It is readable only when UPC Add-on is printed with UPC code.
UPC Add-on Code(BOOKLAND)