384
Note 3.7.7
*Please note the followings when using READY/BUSY.
When sending print data from the host, make sure the printer power is on before sending.
*When sending data that receive buffer size is more than 2.95 MB by using XON/XOFF, status 2, status 3, status 4, and status 5,
there will be receive buffer full error. When sending data, send data that is less than 2.9 MB and send more data by watching the
printer status.
*Parity error will be detected when the parity error occurs after receiving ESC+A.
To Next Page
Loading...
