413
802.1x authentication
ENABLE (*1)
802.1x authentication
DISABLE
802.1x authentication
ENABLE
802.1x authentication
DISABLE
*1 "WEP key index" and "WEP key" distributed by AP are used for the communication when WEP key is distributed from AP.
(Dynamic WEP)
AP distributes "WEP key index" only or "WEP key index" and "WEP key". When only "WEP key index" is distributed, the
appropriate "WEP key" set at wireless LAN setting of the designated "WEP key index" will be used. With above condition, it is
impossible to communicate if the "WEP key" are not identical.
*2 The details regarding the user name and password are explained at "6.11.3 802.1x authentication and certification".
*3 Selection at the Shared Key will be disabled and operates with Open System with Ad Hoc mode.
802.1x authentication and certification 6.12.3
Depending on the format, certification is necessary or not necessary in 802.1x authentication. When the certification is
necessary, it needs to be imported from the WEB setting screen.
Type of certification and secret key, necessity of certification, ID, and password are explained below.
- Items need to be imported from the WEB setting screen
File: select files of route certification
Password: input the secret password for the client certificate
File: files of client certification
Password: input password for the secret key
File: select secret files
Password: input password for the PAC files
File: select PAC files
- Necessity of ID/password and each certification in the 802.1x authentication.
Necessity (○:necessary, ×: not necessary, △: others)
*1 Necessary when PAC file auto distribution is OFF.
To Next Page
Loading...
