SATO s84ex - Installing the Printer; Installation Precautions

15
Print position command 6
6.1 Print Position
6.1 ESC+H Horizontal Print Position
ESC+H
Hexadecimal
code
ESC
H
Parameter
<1B>
16
<48>
16
aaaa
Initial value
aaaa=1
Valid range and
term of
command
When the power switch is OFF
The set parameter is not maintained.
Valid range within item
The set parameter is in effect until a new specification is made.
Valid range between item
The set parameter becomes the initial value at the next item
<A>.
[Function]
Specifying horizontal print position from its start point by dot.
[Format]
<H>aaaa
●Parameter
a[Horizontal Print Position] = Refer to the table below.
[Coding Example] Horizontal print position: 200 dots
<A>
<V>100<H>200<P>2<L>0202<XM>ABCD
<Q>2
<Z>
[Note]
Specifying the start of the horizontal position for the printing of text, barcode, ruled line and graphic.
[Remarks]
1. Any contents such as text, barcode, graphic exceed the printable area will not print.
2. When specifying “0” for print position, the operation is the same as when setting to “1”.
[Initial Value and Valid Range of Parameter]
[S84-ex]
Head density
Initial value
Valid range (dots)
8dots/mm (203 dpi)
1
1 to 832
12dots/mm (305 dpi)
1
1 to 1248
24dots/mm (609 dpi)
1
1 to 2496
[S86-ex]
Head density
Initial value
Valid range (dots)
8dots/mm (203 dpi)
1
1 to 1340
12dots/mm (305 dpi)
1
1 to 2010
[Valid Commands]
Font
<XU>
<XS>
<XM>
<XB>
<XL>
<OA>
<OB>
<RD>
<$=>
<K1>
<K2>
<K8>
<K9>
<k1>
<k2>
<k8>
<k9>
<U>
<S>
<M>
<WB>
<WL>
<RG>
Barcode
<B>
<BC>
<BG>
<BI>
<D>
<D><d>
<BD>
<BT>
<BW>
<BP>
<BF>
<BS>
<BL>
<BL><d>
<BM>
2D code
<2D10>
<BK>
<2D12>
<2D20>
<BV>
<2D30>
<2D31>
<2D32>
<BQ>
<2D33
>
<2D50>
<BX>
<2D51>
Composite
symbol
<EU>
Modification
<WD>
<FW>
<(>
<RF>
<FC>
<FT>
<RM>
<%A>
<WS>
Graphic
<G>
<GM>
<GP>
Memory card
<GR>
<GC>
<PY>
Horizontal Print Position