SATO s84ex - Adjusting the Media Sensors

247
13.11 Memory Card
ESC+GC BMP File Call
13.11
ESC+GC
Hexadecimal
code
ESC
GC
Parameter
<1B>
16
<47>
16
<43>
16
aaa
Initial value
Nil
Valid range and
term of
command
When the power switch is OFF
The set parameter is not maintained.
Valid range within item
The parameter preset will be invalid.
Valid range between item
The parameter preset will be invalid.
[Function]
Invoking and printing out the data registered with Registration of BMP File.
[Format]
<GC>aaa
●Parameter
a[Registration No.] = Valid range : 1 to 999
[Coding Example]
<A>
<V>100<H>100
<CC>1
<GC>1
<Q>2
<Z>
[Notes]
1. Make sure to specify the slot number used for card slot command <CC> before the BMP file recall command <GC>.
2. Rotation <%> and Enlargement <L> are available for the invoked data.
3. Specify Card Slot for Use <CC> prior to this command when using.
4. The error occurs when unused or the slot which the printer is allocated is specified (Refer to Card Slot for Use <CC>).
[Important]
Do not turn the printer power off when accessing to the memory. When the printer power is off while memory accessing,
the data in the accessed media may be corrupted.
BMP File Call