425
7.7 Transmission Sequence
Normal end 7.7.1
7.7.1.1 Status 4 (when CRC check is enabled)
Print command (STX-ETX CRC)
Print command (STX-ETX CRC)
Error release (press the LINE key)
ID number = [06]
Status = "Printing"
Remaining print number = [000050]
Job name = [SATO]
ID number = [05]
Status = "Printing"
Remaining print number = [000001]
Job name = [SATO]
ID number = [05]
Status = "Printing"
Remaining print number = [000098]
Job name = [SATO]
ID number = [05]
Status = Paper end
Remaining print number = [000098]
Job name = [SATO]
ID number = [06]
Print number = 50
Job name = [SATO]
ID number = [05]
Status = "Printing"
Remaining print number = [000100]
Job name = [SATO]
ID number = [05]
Status = "Editing"
Remaining print number = [000000]
Job name = [SATO]
ID number = [05]
Print number = 100
Job name = [SATO]
ID Number = [Space]
Status = "Waiting for receive"
Remaining print number = [000000]
Job name = [Space]
Connected
Disconnected
(Printer status no error)
(Printer status no error)
To Next Page
Loading...
