SATO s84ex - ESC+PR Release of Proportional Pitch

20
11.1 Modification
11.1 ESC+PR Release of Proportional
Pitch
ESC+PR
Hexadecimal
code
ESC
PR
Parameter
<1B>
16
<50>
16
<52>
16
Nil
Initial value
Nil
Valid range and
term of
command
When the power switch is OFF
The set command is not maintained.
Valid range within item
The set command is in effect until a new specification is made.
Valid range between item
The set parameter becomes the initial value at the next item
<A>.
[Function]
Specifying the release of proportional pitch.
[Format]
<PR>
[Coding Example]
<A>
<PR>
<V>100<H>200<P>2<L>0202<XM>ABCD
<Q>2
<Z>
[Note]
The default status of the printer is set to "Proportional pitch". The setting (Fix/Proportional) can be changed in the advanced
mode of the printer LCD.
[Valid Commands]
Font
<XU>
<XS>
<XM>
<XB>
<XL>
<RD>
<$=>
Modification
<RF>
Release of Proportional Pitch