SATO s84ex - ESC+GR Graphic Call

245
13.9 Memory Card
ESC+GR Graphic Call
13.9
ESC+GR
Hexadecimal
code
ESC
GR
Parameter
<1B>
16
<47>
16
<52>
16
aaa
Initial value
Nil
Valid range and
term of
command
When the power switch is OFF
The set parameter is not maintained.
Valid range within item
The parameter preset will be invalid.
Valid range between item
The parameter preset will be invalid.
[Function]
Invoking and printing out the data registered with Registration of Graphic <GI>.
[Format]
<GR>aaa
●Parameter
a[Registration No.] = Valid range : 1 to 999
[Coding Example]
<A>
<V>100<H>100
<CC>1
<GR>1
<Q>1
<Z>
[Notes]
1. Make sure to specify the slot number used for card slot command <CC> before the graphic recall command <GR>.
2. Ignoring Base Reference Point Offset <A3> and making no correction.
3. Rotation <%> and Enlargement <L> are available for the invoked graphic.
4. Specify Card Slot for Use <CC> prior to this command when using.
5. The error occurs when unused or the slot which the printer is allocated is specified (Refer to Card Slot for Use <CC>).
[Important]
Do not turn the printer power off when accessing to the memory. When the printer power is off while memory accessing,
the data in the accessed media may be corrupted.
Graphic Call