SATO s84ex - ESC+BJF Memory Card Initialization

255
13.18 Memory Card
ESC+BJF Memory Card Initialization
13.18
ESC+BJF
Hexadecimal
code
ESC
BJF
Parameter
<1B>
16
<42>
16
<4A>
16
<46>
16
aaaaaaaa
Initial value
Nil
Valid range and
term of
command
When the power switch is OFF
The set parameter is not maintained.
Valid range within item
The parameter preset will be invalid.
Valid range between item
The parameter preset will be invalid.
[Function]
Specifying the format (initialization) of memory card.
[Format]
<BJF>aaaaaaaa
●Parameter
a[User ID] = Specifying up to 8 bytes in alphanumeric and symbols
[Coding Example]
<A>
<CC>1
<BJF>satocard
<Z>
[Notes]
1. This command is not effective without an optional memory card.
2. Specify slot No. registered with Card Slot for Use <CC> prior to this command by all means.
3. The card will not be formatted and error occurs when the memory card is write-protect. The data is not guaranteed when the
memory card is formatted accidentally. Be careful when formatting the memory card.
4. Initialization takes some time. Do not send any command until the initialization finishes.
5. When SD card is selected by the Card slot for use command <CC> and the SD card is formatted, the contents of the SD card
are deleted all and then the printer creates folders necessary.
[Important]
Do not turn the printer power off when accessing to the memory. When the printer power is off while memory accessing,
the data in the accessed media may be corrupted.
Memory Card Initialization