SATO s84ex - Disconnection During Status Sending after Print Data Reception; When CRC Check Is Disabled (Common to Status 3 and 3,4); When CRC Check Is Enabled (Common to Status 3 and 4)

430
Disconnection during status sending after print data reception 7.7.3
7.7.3.1 When CRC check is enabled (common to Status 3 and 4)
[Notes]
1. When there is no ACK returned, stop the transmission as it appears that some sort of communication interference is
occurring.
2. ACK return may be lost when Bluetooth is disconnected before the printer returning ACK.
7.7.3.2 When CRC check is disabled (common to Status 3 and 3,4)
The printer operation is the same as 7.7.3.1 when CRC check is enabled.
Receive/Analysis/Edit
ID number = [12]
Print number = 50
Job name = [SATO]
Connected
(CONNECT)
Print command (STX-ETX CRC)
Print operation
ACK
Disconnected
or communication
failure
×