SATO s84ex - Timing Chart

367
Timing Chart 3.4.3
1) Normal process
2) Cancel process
The format of CAN will be STX SOH CAN "*****" ETX. (***** will be any item No. )
After sending CAN, please wait about 500 msec before sending the next data.
Avoid sending CAN while sending the print data (STX <A> - <Z> ETX). With the above condition, the job may not be
canceled or the item may not be printed correctly.
Printer
RD
SD
Printing (1)
Online
CAN
ENQ
Statu
Printing (2)
Printer
Receive/Analysis/Edit (1)
STX . . ETX (1)
STX . . ETX (2)
ENQ
ENQ
Status
ENQ
Status
Status
500 msec
ENQ
Status
Status
Power On
Printer
RD
SD
Printer Status
Press the LINE key
STX . . . ETX (1)
ENQ
The format of ENQ will be STX SOH ENQ "*****" ETX. (***** will be any item No. )
Avoid sending ENQ while sending the print data (STX <A> - <Z> ETX). By sending ENQ,
The status may not be returned or there may be print error.
Status
ENQ
Status
STX . . . ETX (2)
Receive/Analysis/
Edit (1)
Receive/Analysis/
Edit (2)
ENQ
ENQ
STX . . . ETX (3)
Receive/Analysis/
Edit (3)
Status
Status
Press the LINE
key
ENQ
Printing (2)
Printing (1)
Initializing
Offline
Online
Buffer near full
state
Buffer near full release