SATO s84ex - Ftp; Telnet

401
6.6 FTP
FTP protocol complies with RFC959. It handles the list of logical printer name as a transmission destination directory, and
performs transmitting files to the directory as the print operation. You can specify ASCII (A) or BINARY (I) or TENEX (L8) as a
transmission mode, however difference of the mode depends on the client.
Directory has 3 names: lp, sjis, euc.
Cue name
Kanji filter
Kanji code
Supporting interface
[○：supported, ×：not supported]
LAN
Wireless LAN
lp
None
N/A
○
○
sjis
None
N/A
○
-
euc
None
N/A
○
-
* Note that establishing multiple session at the same time is not available.
6.7 TELNET
TELNET complies with RFC854. Changing and referring internal settings and displaying status is available by using an
interactive menu. You need to log in as a “root” user and enter password to change the settings.
The root password is not set as the default (line feed) .
In addition, Wireless LAN is not supported.
Please refer to "6.7.1
Setting/Display items
" for the setting of [1: Setup TCP/IP].
<TELNET command example>
Enter [TELNET xxx.xxx.xxx.xxx (IP address)] from the MS-DOS command prompt, and enter user name and
password, then following message will appear.
SATO PRINTER S84-ex Series TELNET server.
Copyright(C) 2010 SATO Corporation
login: root
root’ user needs password to login
password:
User ‘root’ logged in
No. Item Value (level.1)
----------------------------------------------------------
1: Setup TCP/IP
2: Display status
99: EXIT setup
Please select(1-99)?