SATO s84ex - ESC+L Enlargement

18
9.1 Modification
9.1 ESC+L Enlargement
ESC+L
Hexadecimal
code
ESC
L
Parameter
<1B>16
<4C>16
aabb
Initial value
aa=01、bb=01
Valid range and
term of
command
When the power switch is OFF
The set parameter is not maintained.
Valid range within item
The set parameter is in effect until a new specification is made.
Valid range between item
The set parameter becomes the initial value at the next item
<A>.
[Function]
Specifying the enlargement ratio of the font.
[Format]
<L>aabb
●Parameter
a[Horizontal enlargement ratio] = Valid range: 01 to 36
b[Vertical enlargement ratio] = Valid range: 01 to 36
[Coding Example] Horizontal enlargement ratio: 4 times, Vertical enlargement ratio: 3 times
<A>
<V>100<H>200<P>3<L>0403<XM>ABCD
<Q>2
<Z>
[Note]
Enlarges the intercharacter pitch as well. When Character Pitch <P> is used at the same time, the parameter value of the
horizontal enlargement ratio specified in Enlargement <L> will be reflected in the subsequent specification <P>.
[Remark]
If increasing the enlargement ratio, design the print format that does not exceed printable area.
[Valid Commands]
Font
<XU>
<XS>
<XM>
<XB>
<XL>
<OA>
<OB>
<K1>
<K2>
<K8>
<K9>
<k1>
<k2>
<k8>
<k9>
<U>
<S>
<M>
<WB>
<WL>
Modification
<P>
<RF>
Graphic
<G>
<GM>
<GP>
Memory card
<GR>
<GC>
<PY>
Enlargement