SATO s84ex - Disconnection During Print Data Sending; When CRC Check Is Disabled (Common to Status 3 and 4); When CRC Check Is Enabled (Common to Status 3 and 4)

429
Disconnection During Print data sending 7.7.2
[Note]
The print data may be lost when Bluetooth communication is disconnected during the print data sending.
Please resend the data after printer power off and on.
7.7.2.1 When CRC check is enabled (common to Status 3 and 4)
[Note]
When connection of Bluetooth is lost while sending print data (STX-ETX), partly received data will discarded after the
communication timeout time (10 seconds).
7.7.2.2 When CRC check is disabled (common to Status 3 and 4)
[Note]
The print data may be lost when Bluetooth communication is disconnected during the print data sending. Please resend the
data after printer power off and on.
Receive/Analysis/Edit
Communication time-out period has passed
* Clear the halfway received print command.
ID number = [05]
Print number = 50
Job name = [SATO]
Connected
(CONNECT)
Print command (STX-ETX CRC)
×
ENQ
(Status request command)
Status
ID number = [05]
Status = "Waiting for receive"
Remaining print number = [000000]
Status = "Printing"
Print number = 000100
Print command (STX-ETX CRC)
ID number = [06]
Print number = 50
Print operation
Disconnected
or communication
failure
ACK
Receive/Analysis/Edit
ID number = [12]
Print number = 50
Job name = [SATO]
Connected
(CONNECT)
Host
Printer
Print command (STX-ETX)
×
Disconnected
or communication
failure