SATO s84ex - ESC+PS Proportional Pitch

19
10.1 Modification
10.1 ESC+PS Proportional Pitch
ESC+PS
Hexadecimal
code
ESC
PS
Parameter
<1B>
16
<50>
16
<53>
16
Nil
Initial value
Nil
Valid range and
term of
command
When the power switch is OFF
The set command is not maintained.
Valid range within item
The set command is in effect until a new specification is made.
Valid range between item
The set parameter becomes the initial value at the next item
<A>.
[Function]
Specifying the proportional pitch.
[Format]
<PS>
[Coding Example]
<A>
<PS>
<V>100<H>200<P>2<L>0202<XM>ABCD
<Q>2
<Z>
[Notes]
1. If specifying this command, width of alphanumeric becomes narrower than the time when <PS> was not specified.
2. If setting data other than specified, proportional print will not be performed.
3. In the printer initial state, [Proportional Pitch] is set to default. Go to the Advanced Mode of the printer LCD display when
selecting the default setting value (Fixed/Proportional).
[Valid Commands]
Font
<XU>
<XS>
<XM>
<XB>
<XL>
<RD>
<$=>
Modification
<RF>
Proportional Pitch