SATO s84ex - Calendar Command; ESC+WT Calendar Setting

260
Calendar command 14
14.1 Calendar
ESC+WT Calendar Setting
14.1
ESC+WT
Hexadecimal
code
ESC
WT
Parameter
<1B>
16
<57>
16
<54>
16
aabbccddee
Initial value
Nil
Valid range and
term of
command
When the power switch is OFF
The set parameter is maintained.
Valid range within item
The set parameter is in effect until a new specification is made.
Valid range between item
The set parameter is in effect until a new specification is made.
[Function]
Setting the calendar.
[Format]
<WT>aabbccddee
●Parameter
a[Year] = 00 to 99
b[Month] = 01 to 12
c[Date] = 01 to 31
d[Hour] = 00 to 23
e[Minute] = 00 to 59
[Coding Example] 2020, January 1, 13:13
<A>
<WT>2001011313
<Z>
[Notes]
1. Calendar IC is necessary for this command. This command cannot be used without a calendar IC.
2. When 00 to 80 is specified as the parameter a, 20 is applied to the upper 2 digits and the year is 20aa. When 81 to 99 is
specified as the parameter a, 19 is applied to the upper 2 digits and the year is 19aa.
Calendar Setting