SATO s84ex - ESC+K1(K2) Memory Card Horizontal Writing External Character Recall

253
13.16 Memory Card
ESC+K1(K2) Memory Card Horizontal
13.16
Writing External Character Recall
ESC+K1(K2)
Hexadecimal
code
ESC
K1(K2)
Parameter
<1B>
16
<4B>
16
<31>
16
(<4B>
16
<32>
16
)
abbn~n
Initial value
Nil
Valid range and
term of
command
When the power switch is OFF
The set parameter is not maintained.
Valid range within item
The parameter preset will be invalid.
Valid range between item
The parameter preset will be invalid.
[Function]
Recall the external characters registered to memory card.
[Format]
<K1>an~n
<K2>an～n
●Parameter
a [External characters registration] = H : HEX character
B : Binary code
I : HEX character with smoothing function
C : Binary code with smoothing function
J : HEX character with highlight function
D : Binary code with highlight function
K : HEX character with smoothing and highlight function
E : Binary code with smoothing and highlight function
n~n [Registration code] = <GB18030 specification>
H, I, J, K : “8021” ~ “807F”
B, C, D, E : 8021H ~ 807FH
<BIG5/KSX1001 specification>
H, I, J, K : “9021” ~ “907F”
B, C, D, E : 9021H ~ 907FH
[Coding Example]
<A>
<V>100<H>100
<CC>1
<K1>H9021
<Q>2
<Z>
[Notes]
1. Make sure to specify the card slot command <CC> just before the memory card horizontal writing external character recall
command <K1>.
2. The error occurs when unused slot is specified.
[Important]
Do not turn the printer power off when accessing to the memory. When the printer power is off while memory accessing,
the data in the accessed media may be corrupted.
Memory Card Horizontal Writing
External Character Recall