SATO s84ex - ESC+XL XL Font (Default Font Size: 48×48 Dots)

52
34.1 Font
34.1 ESC+XL XL Font (Default Font
Size: 48×48 dots)
ESC+XL
Hexadecimal
code
ESC
XL
Parameter
<1B>
16
<58>
16
<4C>
16
an～n
Initial value
Nil
Valid range and
term of
command
When the power switch is OFF
The set parameter is not maintained.
Valid range within item
The parameter preset will be invalid.
Valid range between item
The parameter preset will be invalid.
[Function]
Specifying the character in default font size of W48 x H48 dots.
[Format]
<XL>an～n
●Parameter
a[Smoothing] = 0: Smoothing disabled
1: Smoothing enabled (When Enlargement <L> rate is between threefold and nine fold)
n[Print data] = Data
[Coding Example]
<A>
<V>100<H>200<P>2<L>0304<XL>0ABCDE
<Q>2
<Z>
[Notes]
1. XL font can be set to either fixed pitch or proportional pitch.
2. To set up fixed and proportional pitch, use the command or go to the Advanced Mode of printer LCD display.
3. Even the smoothing is enabled, it will be invalid when enlargement <L> is specified for 1 time, 2 times, and 10 to 36 times.
[Valid Commands]
Print position
<V>
<H>
Modification
<P>
<L>
<%>
<PS>
<PR>
<F>
<&>
</>
<O>
<WD>
<%A>
<WS>
Barcode
<D><d>
<BL><d>
Calendar
<WA>
<WU>
XL Font
(Default Font Size: 48×48 dots)