SATO s84ex - ESC+PI Registration of PCX File

248
13.12 Memory Card
ESC+PI Registration of PCX File
13.12
ESC+PI
Hexadecimal
code
ESC
PI
Parameter
<1B>
16
<50>
16
<49>
16
aaa,bbbbb,n~n
Initial value
Nil
Valid range and
term of
command
When power switch is OFF
The registered data becomes valid.
Valid range within item
The parameter preset will be invalid.
Valid range between item
The parameter preset will be invalid.
[Function]
Specifying the registration of PCX file created by such as Paint Brush of Windows.
[Format]
<PI>aaa,bbbbb,n~n
●Parameter
a[Registration No.] = 1 to 999
b[Total bytes of PCX file] = 1 to 99999
Specify the file size of PCX file for total bytes.
n[Data] = PCX file data
Data is sent as binary data (Outputs 8 bits as one character data all at once)
[Coding Example]
<A>
<CC>1
<PI>001,12345,n~n
<Z>
[Notes]
1. Make sure to specify the slot number used for card slot command <CC> before the PCX file registration command <PI>.
2. Data is sent in binary data (Outputs 8-bit data as 1 font data all at once). (The file size of PCX file is the total bytes of
PCX file, and PCX file data are data)
3. When [Total bytes of PCX file] are not matching the transfer data, this may become the cause of malfunction.
4. Total bytes are the file size displayed at [Property] and such.
5. PCX file is available in Black/White mode only. In color mode, printing will not be performed due to command error. Also,
this command is not valid for the PCX compressed file. Make sure that the file extension is set to [PCX] before printing.
6. Specify Card Slot for Use <CC> prior to this command when using.
7. The error occurs when unused or the slot which the printer is allocated is specified (Refer to Card Slot for Use <CC>).
[Important]
Do not turn the printer power off when accessing to the memory. When the printer power is off while memory accessing,
the data in the accessed media may be corrupted.
Registration of PCX File