SATO s84ex - ESC+B Barcode (Ratio 1:3)

93
58.1 Barcode
58.1 ESC+B Barcode (Ratio 1:3)
ESC+B
Hexadecimal
code
ESC
B
Parameter
<1B>
16
<42>
16
abbcccn～n
Initial value
Nil
Valid range and
term of
command
When the power switch is OFF
The set parameter is not maintained.
Valid range within item
The parameter preset will be invalid.
Valid range between item
The parameter preset will be invalid.
[Function]
Specifying the barcode of narrow and wide bar width ratio 1:3.
[Format]
<B>abbcccn～n
●Parameter
a[Barcode symbology] = Refer to the table below.
b[Narrow bar width] = 01 to 36 dots
c[Height of barcode] = 001 to 999 dots
n[Print data] = Data
Barcode symbology (Ratio of module composition may not be available depending on the barcode symbology.)
a
Barcode symbology
Descriptions
Ratio
0
CODABAR (NW-7)
Set print data including Start/Stop character.
Start/Stop Characters are [A,B,C,D,E,N,T,a,b,c,d,e,n,t]
However, the reading result of [E, N, T, a, b, c, d, e, n, t] will be [D, B, A, A,
B, C, D, D, B, A.]
e.g.) When barcode print data is [123], specify [A123A].
Barcode character pitch is enabled.
Refer to the code list of the CODEBAR for the print data.
1:3
1
CODE39
Set print data including Start/Stop Character.
Start/Stop Character is [*].
e.g.) When barcode print data is [12345], specify [*12345*].
Barcode character pitch is enabled.
Refer to the code list of the CODE39 for the print data.
1:3
2
ITF
Specify print data in even-numbered digit.
If specifying in odd-numbered digit, “0” will be added to the head of print
data.
Refer to the code list of the ITF for the print data.
1:3
3
JAN/EAN13
The barcode will have no guard bar and human readable information.
Refer to the code list of the JAN/EAN13 for the print data.
Fixed
(11,12, 13
digits)
4
JAN/EAN8
The barcode will have no guard bar and human readable information.
Refer to the code list of the JAN/EAN8 for the print data.
Fixed
(7,8 digits)
5
Industrial 2of5
Barcode character pitch is enabled.
Refer to the code list of the Industrial 2of5 for the print data.
1:3
6
Matrix 2of5
Barcode character pitch is enabled.
Refer to the code list of the Matrix 2of5 for the print data.
1:3
A
MSI
Print data can be specified up to 13-digit.
Refer to the code list of the MSI for the print data.
Fixed
C
CODE93
Refer to CODE 93 <BC>.
Fixed
E
UPC-E
Specify 6-digit number for print data.
Refer to the code list of the UPC-E for the print data.
Fixed
F
UPC add-on code
Bookland
Refer to the UPC add-on code/Bookland specification <BF>.
Fixed
G
CODE128
Refer to CODE128 <BG>.
Fixed
H
UPC-A
Barcode will have no guide bar and human readable information.
Refer to the code list of the UPC-A for the print data.
Fixed
I
GS1-128 (UCC/EAN128)
Refer to GS1-128(UCC/EAN128)<BI>.
Fixed
P
Postnet
Refer to the Postnet specification <BP>.
Fixed
S
USPS code
Refer to the USPS code specification <BS>.
Fixed
Barcode (Ratio 1:3）