SATO s84ex - ESC+EU Composite Symbol

120
72.1 Barcode
72.1 ESC+EU Composite Symbol
ESC+EU
Hexadecimal
code
ESC
EU
Parameter
<1B>16
<45>16<55>16
aabb(cc)(ddd) n~n
Initial value
Nil
Valid range and
term of
command
When the power switch is OFF
The set parameter is not maintained.
Valid range within item
The parameter preset will be invalid.
Valid range between item
The parameter preset will be invalid.
[Function]
Specify composite symbol EAN and UCC.
[Format 1]
<EU>aabbccn～n
●Parameter
a [Composite symbol] = 01 : GS1 DataBar Composite (CC-A/CC-B)
02 : GS1 DataBar Truncated Composite (CC-A/CC-B)
03 : GS1 DataBar Stacked Composite (CC-A/CC-B)
04 : GS1 DataBar Stacked Omni-Directional (CC-A/CC-B)
05 : GS1 DataBar Limited Composite (CC-A/CC-B)
06 : GS1 DataBar Expanded Composite (CC-A/CC/B)
/ GS1 DataBar Expanded Stacked (CC-A/CC-B)
07 : UPC-A Composite (CC-A/CC-B)
08 : UPC-E Composite (CC-A/CC-B)
09 : EAN13 Composite (CC-A/CC-B)
10 : EAN8 Composite (CC-A/CC-B)
b [Narrow bar width] = 01 ~ 12 (dots)
c [Segment width] = 02 ~ 22 (even numbers only)
* Supported only for DataBar Expanded Composite (CC-A/CC-B)
n [Print data] = data
The maxim digit available for 1D data
GS1 DataBar Composite (CC-A/CC-B)
13 digits
GS1 DataBar Truncated Composite (CC-A/CC-B)
13 digits
GS1 DataBar Stacked Composite (CC-A/CC-B)
13 digits
GS1 DataBar Stacked Omni-Directional (CC-A/CC-B)
13 digits
GS1 DataBar Limited Composite (CC-A/CC-B)
13 digits
GS1 DataBar Expanded Composite (CC-A/CC-B)
/ GS1 DataBar Expanded Stacked (CC-A/CC-B)
74 digits
UPC-A Composite (CC-A/CC-B)
11 digits
UPC-E Composite (CC-A/CC-B)
Specify the 1D data in the format of "XX00000XXX"(X is
variables).
Fixed to 10 digits
EAN13 Composite (CC-A/CC-B)
12 digits
EAN8 Composite (CC-A/CC-B)
7 digits
* Check digit is automatically calculated and added.
* Separate the 1D data and 2D data with '|'(7CH) when specifying composite symbol printing.
Data = 1D data| 2D data
* It is necessary to specify the data of GS1 DataBar Composite (CC-A/CC-B) in 1 to 16 digits of the GS1 DataBar Expanded
Composite (CC-A/CC=B).
* It is possible to input up to 74 digits for numeric and up to 41 digits for alphabet including the data of GS1 DataBar Composite
(CC-A/CC-B) for the GS1 DataBar Expanded Composite (CC-A/C-B).
(It is possible to input up to 41 digits for alphanumeric including GS1 DataBar Composite (CC-A/CC-B) data)
* 0 is added before the data when the specified data are less than the maximum digit for 1D data.
* It is possible to input up to 338 digits for 2D data, however, the maximum input digit varies depending on the barcode type.
* The barcode may exceed the printable area depending on the data or data digit. The barcode may not be read in that case.
Please adjust the data so that the whole barcode can be printed in the printable area.
* The input digit of the UPC-A Composite is 11 digits only, however, EAN14 Composite (CC-A/CC-B) will be printed when 12
digits has been input to maintain compatibility.
Composite Symbol