121
[Format 2]
<EU>aabbcccn～n
●Parameter
a[Composite symbol] = 11 : GS1-128 Composite (CC-A/CC-B)
12 : GS1-128 Composite (CC-C)
b[Narrow bar width] = 01 ~ 12 (dots)
c[Barcode height] = 001 ~ 500 (dots)
* Specify the barcode height when the narrow bar width is 01.
The barcode height will be 300 dots when the narrow bar is 03, and barcode height is 100.
n[Print data] = barcode data (up to 236 digits for 1D and 2D data together)
The maximum digit available for 1D and 2D data (however, there is a limitation for the maximum digit for 1D data)
GS1-128（UCC/EAN128） with CC-A/B
GS1-128（UCC/EAN128） with CC-C
The maxim digit available for 1D data
GS1-128（UCC/EAN128） with CC-A/B
GS1-128（UCC/EAN128） with CC-C
* Separate the 1D data and 2D data with '|'(7CH) when specifying composite symbol printing.
Data = 1D data| 2D data
* Please use '#'(23H) when specifying CC-A/B(MicroPDF) or CC-C(PDF417) as the FNC1(GS).
* The 2D data of GS1-128(UCC/EAN128) With CC-A/B can input up to 338 digits.
* When the 2D data of the GS1-128(UCC/EAN128) With CC-A/B is less than 56 digits, it will be CC-A automatically,
and it will be CC-B when it is 57 to 338 digits.
* The digit varies depending on the width of the barcode in GS1-128(UCC/EAN128) With CC-C, and the maximum
digit of the 1D and 2D is 2361 digits.
[Coding Example 1] When using GS1 DataBar Composite (CC-A/CC-B) command
<A>
<V>100<H>100
<EU>01040361234567890|11990102
<Q>1
<Z>
[Coding Example 2] When using GS1 DataBar Truncated Composite (CC-A/CC-B) command
<A>
<V>100<H>100
<EU>02040361234567890|11990102
<Q>1
<Z>
[Coding Example 3] When using GS1 DataBar Stacked Composite (CC-A/CC-B) command
<A>
<V>100<H>100
<EU>03040341234567890|17010200
<Q>1
<Z>
[Coding Example 4] When using GS1 DataBar Stacked Omni-Directional (CC-A/CC-B) command
<A>
<V>100<H>100
<EU>04040341234567890|17010200
<Q>1
<Z>
[Coding Example 5] When using GS1 DataBar Limited Composite (CC-A/CC-B) command
<A>
<V>100<H>100
<EU>05040351234567890|21ABCDEFGHIJKLMNOPQRSTUV
<Q>1
<Z>
To Next Page
Loading...
