SATO s84ex - ESC+TM Trademark Print

303
16.5 RFID Command
ESC+TM Trademark print
16.1
ESC+TM
Hexadecimal
code
ESC
TM
Parameter
<1B>16
<54>16<4D>16
a
Initial value
Nil
Valid range and
term of
command
When the power switch is OFF
The set parameter is not maintained.
Valid range within item
The parameter preset will be invalid.
Valid range between item
The parameter preset will be invalid.
[Function]
This command specifies the printing of the trademark of EPC Global Logistics Group in the tag label.
[Format]
<TM>a
●Parameter
a = [Number of logo]
1:
1:
2: 2:
[Coding Sample1] [Coding Sample2]
<A> <A>
<V>50<H>50<TM>1 <V>50<H>50<TM>2
<Z> <Z>
[Valid command]
Modification command
<V>
<H>
<L>
<%>
[Notes]
1. The specification of coordinates <V><H>, rotation <%>, and magnification <L> is enabled.
2. To perform magnification <L>, the command must be specified immediately before the trade mark print
command <TM>.
3. The image size of trademark is (Image 1: W143 x H101 dots, Image 2: 202 x H101 dots).
(When magnification is not specified)
Trademark print